MGATE-MULTI by Mogwai Audio Tools 0 (0)

MGATE-MULTI is a versatile multiband gate plugin with intuitive visual display controls, that offers up to six bands of separation.

Furthermore, each band is provided with the following functionality:

  • Add/remove frequency bands by hovering over the top of the visual display until a ‘+’ button appears. Click on this button at the desired crossover location. A band can be removed by clicking on the ‘x’ button on the crossover that appears before the band to be removed.
  • LOOKAHEAD can be activated to add a small amount of delay to the sidechain signal to deal with fast attack signals.
  • Adjust the gate by using the THRESHOLD, RATIO, ATTACK and RELEASE knobs. Adjust the output gain by using the GAIN knob.
  • Each band can be deactivated, bypassed or soloed by using the buttons at the top right of each band. Additionally, the frequency bands can be adjusted by dragging the crossovers in the visual display. Additionally, the output gain can be adjusted in the visual display. The A-B functionality can be used to compare and select desired settings. A good selection of presets are provided as a starting point.
Additional features:
  • Global output controls including gain, wet/dry mix and bypass. Use the ‘BAND|OUTPUT’ toggle to switch control views.
  • Compare and select desired settings by using the A-B functionality.
  • A selection of presets are provided as a starting point.
0
0

SawPluck by RDGAudio 0 (0)

SAWPLUCK

SawPluck is our first Analogue Emulated Trance Pluck Synthesizer for quick Trance Chords, Riffs and Melody creation. We have carefully crafted all the details of analogue circuitry and electronic components through advanced DSP and Mathematics. Coded through C++ Framework.

Why did we make Analogue Virtual Emulation?

Although it’s a Single Oscillator Synthesizer still it has a very warm sound what is usually missing in regular subtractive synthesizer. When you will play and tweak it’s settings you will get pure rich analog Pluck sound inside your DAW.

Is It free for personal and commercial use?

Yes, It is currently giving away for free.

Features

  • SawPluck is free .
  • Single SAW OSC yet rich and warm.
  • 15 different Filter types (Low Pass, High Pass, Notch, Hybrid, Analog etc..).
  • Amp Envelope and Filter Envelope (ADSR).
  • Filter Cutoff, Reso and Filter Mod.
  • Built in Delay and Reverb Effects.
  • .rdg/.RDG user presets.
  • Comes with Factory presets.
  • User can create and save their own Presets as .rdg file format.
  • 32 voice Polyphony.

System Requirements:

  • Graphics Card 1GB (2 GB recommended).
  • RAM 1 GB (2 GB recommended).
  • Intel CPU.
  • ASIO driver and audio interface.
  • Windows VST3 64-bit.
  • Mac VST3.
  • Windows 8,10 (64-bit).
  • Mac Mojave or Up.

https://rdgaudio.com/sawpluck/

RDGAudio SawPluck with Library and Factory Presets

RDGAudio SawPluck Mac VST3 with Samples

0
0

Performer Free by Crumar – linux 0 (0)

Performer Free is a freeware edition of the Crumar Performer plugin released only for Linux users. It is a stripped-down version with every extra feature removed, leaving just the Performer as it is in real life. It’s available in VST2, VST3 and StandAlone format as a precompiled binary for amd64 (Intel architecture) and armhf (Raspberry Pi4 and compatible boards). The UI dowsizes automatically if the screen resolution is lower than the normal plugin’s UI size, in order to fit smaller displays that can be used with the Raspberry Pi. It’s been tested and proved to work flawlessly under Ubuntu 20.04, Ubuntu 20.10, Raspberry Pi OS running on a Pi 4 with 4 GB RAM, and Raspberry Pi 3 B+.

https://www.crumar.it/?a=showproduct&cat=software&pid=CSP0

CrumarPerformerFree

 

0
0

ATK MT2 by Matthieu Brucher 0 (0)

ATK MT2 is an overdrive plugin modelling the Boss MT2 pedal.

It models all the tone shaping components of the pedal as well as the override section, leading to a precise reproduction of the characteristic sound on the MetalZone.

Additional hidden parameters allows you to tweak the tone control Q factors as the traditional level and frequencies.

No Webside
0
0

Fazu Bass Distortion by Owl O’Lantern 0 (0)

Fazu is a distortion made for crushing basslines into a thick, filtered sludge. Featuring tonal and bias options that can open up into the roar of a lion or close off into the squeak of a mouse. Available on Mac as a Universal binary AU and on Windows as a VST3.

https://www.owlolantern.com/releases/fazu

Fazu_win

Fazu_mac

0
0

Inphonik free bitcrusher effect PCM2612 plugin for Windows, macOS, GNU/Linux, and iOS 0 (0)

 

Inphonik has announced the release of a free bitcrusher effect plugin for Windows, macOS, GNU/Linux, and iOS.

Meet the PCM2612 Retro Decimator Unit, a bitcrusher effect plug-in with a distinctive legacy. Based on the work we made on the RYM2612 Iconic FM Synthesizer, our tribute emulation of the Sega Genesis sound chip, the 8-bit decimation is inherited from the FM synth’s PCM playback feature, packed in a simple and compact effect unit. Bonus: it’s free!

The effect is available in 64-bit VST/VST3, AU and AAX plugin formats, as a Rack Extension for Reason 10.1 and higher, and as an AUv3/IAA app for iOS.

https://www.inphonik.com/products/pcm2612-retro-decimator-unit/

PCM2612 1.0.0 Setup

PCM2612 1.0.0 Installer

PCM2612_1.0.0_Linux.tar

0
0

Low Wave Studios Track24 v1.0.0 VST3 AU WiN MAC [FREE] 0 (0)

Track24 is neither a Tape Emulation, nor a simple Saturator. It behaves like Analog Tape but without its “downsides”. It doesn’t care about Flutter, Wow or Noise, but it has the Tone and Saturation characteristics of Tape, plus other extra functionality

• Features a Tape Saturation section with a variable Texture control to add more Even or Odd order harmonics;
• A Tone section with 4 filter “presets” that were inspired by 2 different tape machines, running at different Ips – with “Neutral” being a completely flat;
• 4x oversample button to avoid aliasing – adds a tiny bit of latency;
• High and Low pass filters that are pre-saturation. To shape the incoming signal;
• A Dry/Wet knob to mix the clean with the saturated signal.

https://lowwavestudios.com/track24/

Track24.v1.0.0

0
0

Kit Plugins Burier v1.0 x64 VST3 AU AAX STANDALONE WiN MAC [FREE] 0 (0)

The Burier is a saturation and filter plugin designed for use on a variety of applications. It has a saturation stage, followed by a pair of resonant filters, output attenuation, and dry/wet mixer.

The filters have 12 dB of attenuation per octave. They are IIR (Infinite Impulse Responses) filters with a TPT (topology-preserving transform) structure. Their behavior is based on the analog SVF (state-variable filter) circuit, which is a second-order RC active filter.

Not only can you add it to your guitars, but also it does its job tremendously well on pianos, drums, synths, vocals, and basses. You can go from light overdrive to a hard punchy saturation.

CONTROLS

Output
The output control attenuates the level of the processed sound to compensate for the extra level added by the Bury distortion stage.

Link
By activating the link switch, the output gain will be automatically set to compensate for the added level.

Mix
The mix control allows the user to blend the wet and dry signal.

Low-cut
It controls the frequency of the -3 dB point for the built-in lo-cut filter.

Hi-cut
It controls the frequency of the -3 dB point for the built-in hi-cut filter.

Distribution Formats
The Burier plugin is distributed in VST3 (Steinberg Virtual Studio Technology 3), AU (macOS Audio Unit), AAX (Avid Audio Extension), and as a standalone application (.exe for Windows and .app for macOS). It is compatible with all the DAWs (Digital Audio Workstations) that supports the formats previously mentioned. It supports mono and stereo signals.

Minimum System Requirements
• 4 GB RAM and 4 GB free disk space
• 64-bit operating system
• Windows 10
• macOS 10.11 or later (Intel only, Big Sur not tested yet)
• Intel i3 or later
• AMD Quad-Core (Windows)
• Apple M1 (ARM-based) processors are not tested yet

https://kitplugins.com/collections/frontpage/products/burier

Burier_v1.0_Installer_Windows

Burier_v1.0_Installer_macOS

 

 

0
0

Analog Obsession & BPB Rare v6.0 VST VST3 AU WiN MAC [FREE] 0 (0)

Rare: The Rarest!

Analog Obsession & BPB releases Rare! And we made it really “Rare”!

There are tons of Pultec! All different but same process at the end. We thought that our version must be different!

Pultec is passive eq with gain stage at the end. Simple but awesome design.
I changed this design and added switchable gain stage. Pre and Post gain stage!

Pultec has its own gain stage at the end and when we boost low or high too much, gain stage will react according to eq moves. That’s the special design of Pultec.

But if we place gain stage before eq section, we can saturate signal at the unity gain without changing character by eq section and use eq without side effects of output gain stage.

Pultec has SRPP design and really colorful. So, it will saturate and compress especially low frequencies. But when we switch Pre Gain Stage, our low boost will give same harmonic character as flat. Also, we can keep highs from gain stage and this will make highs cleaner! With this feature, we can use Pultec without any harmonic changes while we use eq section.

Features
GAIN: Will set gain stage pre or post eq
CPS Low Frequency: Low frequency switch
CPS Low Boost: Low frequency boost
CPS Low Atten: Low frequency atten
KCS High Frequency: High frequency switch
KCS High Boost: High frequency boost
ATTEN SEL High Atten: High atten frequency switch
ATTEN: High frequency atten
POWER: Bypass
OUTPUT: Output control
ANALOG OBSESSION: This label is clickable. It will turn to red and engage Oversampling (4x)

Available Formats
VST/VST3/AU | Mac 10.9 – 11.X
VST/VST3 | Windows 7 – 8 – 10

UPDATE – Version 6.0 – 24.2.2021
– Fully optimized circuit and improved DSP
– Lower CPU usage
– Added 4x Oversampling
– Added readout
– Added extra GAIN pre/post processing

Read more on BPB!

https://bedroomproducersblog.com/2021/02/24/rare-bpb/

https://www.patreon.com/posts/34323244

0
0

Youlean Loudness Meter v2.4.3 x64 x86 STANDALONE VST AU AAX WiN MAC [FREE] 0 (0)

Youlean Loudness Meter helps you find the true perceived loudness of your audio and prepares it for TV or streaming services release.

Join the thousands of recording studios that already use it.

100% accurate metering
The plugin is calibrated and tested against ITU-R BS2217 testing materials.
It satisfies all requirements defined in ITU-R BS.1770 document.

Changelog

V2.4.3 – February 14, 2021
Fixed choppy scrolling in menus on macOS
Fixed forced dedicated GPU switch on macOS. Now the current GPU will be used if possible
Fixed default preset not loading correctly
Fixed loading custom preset does not change the GUI size
Fixed meter in FCPX getting disabled in Big Sur
Fixed OS preventing editing files after drag and drop
Fixed using multi-file drag and drop could lead to incorrect analysis if channel settings are preselected
Fixed app moving up when resizing the window on macOS
Fixed installer not working in 32 bit Windows
Fixed potential huge RAM usage with VST3 plugin
Fixed GUI flickering in some DAWs on older macOS systems
Fixed Time Code not working in some situations in Pro Tools
Updated VST3 SDK to the 3.7.1
Added support for Apple Silicon
Added warning when sample rate is incorrect in the app
If the sample rate is missing in the app preferences, a default sample rate will be used
Removed momentary window knob
Simplified buffer settings in the app preferences
Ignore master volume setting in app preferences is now disabled by default
Changed view settings icon (hopefully more clear now)
macOS 10.9 is now a minimum system requirement for macOS
Other small UI, UX improvements

https://youlean.co/youlean-loudness-meter/

Youlean-Loudness-Meter-2-V2.4.3-Windows-1

Youlean-Loudness-Meter-2-V2.4.3-macOS-1

0
0