Analog Obsession Room041 v1.0 VST VST3 AU WiN MAC [FREE] 0 (0)

Room041

Room041

First reverb plugin by Analog Obsession!

Not 1:1 modeling based on any device (it’s room reverb plugin) but it has features like famous plate reverb!

Features

Preamp Section

DRIVE: +/-24dB input drive based on tube based reverb line input. Possible to get really dirty or clean reverb!

HPF: Pre-Filter 20 to 100Hz

Reverb Section

Stereo Sep.: Mono to Stereo stereo seperation

Pre-Delay: 0 to 250ms

Decay: 0.1 to 6 sec

Post Eq Section

Low: 20Hz to 2kHz with +/-24dB

High: 200Hz to 20kHz with +/-24dB

Master Section

DRY & WET: 0dB to inf

Available Formats

VST/VST3/AU | Mac 10.9 – 11.X

VST/VST3 | Windows 7 – 8 – 10

Patreon

 

FSUMpeg by Cybergrunge.net 0 (0)

fsumpeg

FSUMpeg is a real-time Lossy compression plugin that emulates low quality audio codecs, poor quality noise reduction algorithms, glitched/broken audio transmission etc.

It is inspired by the strange artifacts and responsiveness of extremely compressed audio codecs. Similar to uploading a video to youtube, downloading it then reuploading, over and over until the quality gets reduced to a glitchy blur. The core of FSUMpeg is ELENA’s spectral modules, which are used to break down incoming signal into a spectrogram, to which various filters are applied. FSUMmpeg features two peak-following or static ring modulators – one pre-FFT and one post-FFT, a bitcrusher and custom waveshaping to achieve extremely lofi bizarre sounds. It has useful bass enhancement knobs and comes in a mono or stereo version.

https://cybergrunge.net/resources/vst/vst.html

FSUmpeg

3Sampler by SaschArt(Donationware) 0 (0)

3sampler_wav_ogg_sfz_drum_reverse_stereo_alternate+49_01

3Sampler it’s a simple and easy-to-use sampler for those who want to save their resources using only three samples. Provides unique stereo dynamics.

Use 3Sampler where you only need three samples.

Features:

  • Three boxes with a visual audio profile for samples. You can use YSampler for five samples.
  • Easy allocation for notes range and root note.
  • Graphical visualization for each note played by velocity and time.
  • Note position view.
  • Attack and Release.
  • On/off button.
  • The possibility of multiplying the semitones interval – unique feature. For example, if we set this multiplier to 12 and the root note value is C4, we will get the C5 value if we play the C#4 key. If you want to set subunit or decimal values, use YSampler.
  • Pan position setting.
  • Pan alternate – a unique and very useful feature which give you dynamics of stereo to your music. For example, if we set pan position to 90% and activate the alternating pan, the first key played will be 90% to right and the next 90% to left.
  • Reverse and loop buttons.
  • Can be used for drums, pluck, keys, leads and pads.
  • Can upload sfz files with a maximum of three samples. Available directives:

and sections

default_path=(string)

sample=(string)

lokey=(12-127 or string like C2) – only in

pitch_keycenter=(12-127 or string like C2) – only in

hikey=(12-127 or string like C2) – only in

pitch_keytrack=600 (100 mean one semitone)

ampeg_attack=0 (decimal seconds)

ampeg_release=0.8 (decimal seconds)

loop_mode=no_loop || loop_continuous || loop_sustain

direction=reverse || any word

pan=-80 (-100 left, 100 right)

pan_alternate=yes || any word

Tips:
Remove donate button: donate minimum 5 euro then insert donate key received by email
Value input by key: over to any knob and right click, insert value by key then hit enter
Also click left on the note to change its value by key.
Set default value: double click on the knob.

Requirements:

DAW (VST host), Windows 32/64-bits or MacOS VST and AU.

Donationware

ProtoPlasm Pro by HG Fortune[win, VSTI, x86] 5 (1)

ProtoPlasm_3

ProtoPlasm Pro is a pad and texture synthesizer.

  • 1 dedicated Attack Oscillator with 128 waveforms controllable by adjustable velocity amount.
  • Super Modulation Morphing via Mod Wheel at selectable rows for the Mod Matrix.
  • Modulation Matrix for LFOs with positive and negative inputs.
  • LKO system for delay with four key-dependant modes.
  • 3 digital PCM-wave oscillators powered by 128 different waveforms (123 new ones).
  • Each oscillator’s level can be modulated by different sources via mod matrix.
  • 1 LP filter (24db Lowpass) with ADSR EG, Filter FM and keytracking.
  • 1 HP filter (12db Hipass) with ADSR EG, Filter FM and keytracking.
  • 2 shapeable LFO with pattern-like waveforms (BPM-synced).
  • 1 LFO with 21 complex waveforms and free speed adjustment.
  • 1 shapeable Sample & Hold with pattern (BPM-synced).
  • Adjustable level for direct, LP and HP output with separate pan each.
  • Stereo-delay (BPM-synced).
  • Soundfonts for oscillators as external SF2 files and wav-files loadable.

R.I.P.

ProtoPlasm-Pro-2011

Cynthia by NineCows[win, VSTI, x86] 0 (0)

Cynthia_3

With Cynthia you can do all that crazy stuff you cant do with a modern synth.

Cynthia is monophonic VSTi, very Old School, but will still be able to keep in tune throughout the song, patches can be stored and it is of course fully MIDI controllable.

Control voltage and sound sources:

  • 3 monophonic oscillators with controls for shape and level of the waveforms, sync and phase-shift
  • Noise generator
  • Two audio inputs so you can modify the sound of a guitar or your voice
  • 8 step control voltage sequencer
  • Attack-hold-decay(-repeat) envelope generator producing a control voltage with adjustable level and bias

Treatments:

  • A self-oscillating filter (can be used as a sine OSC as well)
  • 3 VCA’s controlled by the envelope generator or control voltages assigned to the output level of each channel
  • Ring modulator
  • Spring reverb with short and long spring
  • Delay (delay time from 0 to 10 seconds)


Controls:

  • Tuner for tuning OSC’s by ear
  • Joystick for extra control
  • 16 x 20 routing matrix with inputs for host MIDI pitch and velocity and inversion of individual connections
  • MIDI cc’s can be assigned to any knob
  • Adjustable portamento time
  • Trigger button for triggering the envelope generator


Outputs:

  • 2 pairs of stereo outputs with extra filters, pan and volume control, direct out and speaker (simulating the sound of a pair of canny speakers)

Cynthia

DLYM by Imaginando 0 (0)

2b0dd67b-fba9-4516-a907-39e0c58ccf9c_dlym+2+screenshot

DLYM is a delay modulator plugin which produces flanger and chorus style effects using Imaginando’s powerful processing technology.

Whether you’re looking to add just a touch of depth to your sounds or radically change them, DLYM can do both; we’ve even included over 20 presets/patches to get you started.

  • 2 processing modes – Analog emulation and Dimension style.
  • 6 time syncable modulation waveforms – Sine, Square, Saw, Triangle, Sample & Hold and Filtered Sample & Hold.
  • Adjustable stereo spread.
  • Crossover/cutoff to control frequency range of the effect.
  • Built-in preset/patch manager.
  • Available in a variety of plugin formats: AAX, AU, AUv3, VST.

https://www.imaginando.pt/products/dlym

U-he Podolski v1.2.3 x64 x86 VST AU AAX WIN MAC LiNUX [FREE] 0 (0)

uhe-podolski-screenshot-fullui-1150x553Podolski
Created in 2005 and still going strong. Podolski is a free, straightforward, CPU-efficient virtual analogue synthesizer. One oscillator, one filter, one envelope and an arpeggiator / sequencer. Simple, but with a few tricks up its sleeve. Create high quality sounds with ease.

• Oscillator with variable symmetry (sawtooth to triangle, PWM) and glide
• Polyphonic (up to 16 voices), mono, legato and arpeggiator modes
• 4 envelope modes: ADSR or HDSR, linear or exponential. Sustain has Fall/Rise control
• 2 LFOs: one global, one per voice. Absolute time or host sync, multiple waveforms
• Multimode filter: lowpass, bandpass or highpass with drive and FM
• Combination arpeggiator / 16-step sequencer with extra modulation source
• 2 built-in effects: stereo delay, chorus / flanger
• Resizable UI from 70% to 200%
• Skinnable UI
• Global preferences page
• MIDI learn page and editable list
• Over 300 factory presets
• NEW in v1.2.3: Support for Oddsound MTS-ESP

Requirements
• Apple – Mac OS X 10.9 or newer
• Windows – 7 or newer
• Linux

Host software / DAW
• 1GB RAM, more recommended
• 50MB free disk space
• 1000 × 600 or larger display
Modern CPU required:
• Windows/Linux: Intel Nehalem or newer, AMD Bulldozer or newer
• Mac: Intel Nehalem or newer, Apple M1
• Linux: glibc version 2.28 or newer

NKS-readyPodolski is Native Instruments NKS-ready and compatible with Maschine and Komplete Kontrol hardware.

Podolski
Created in 2005 and still going strong. Podolski is a free, straightforward, CPU-efficient virtual analogue synthesizer. One oscillator, one filter, one envelope and an arpeggiator / sequencer. Simple, but with a few tricks up its sleeve. Create high quality sounds with ease.

• Oscillator with variable symmetry (sawtooth to triangle, PWM) and glide
• Polyphonic (up to 16 voices), mono, legato and arpeggiator modes
• 4 envelope modes: ADSR or HDSR, linear or exponential. Sustain has Fall/Rise control
• 2 LFOs: one global, one per voice. Absolute time or host sync, multiple waveforms
• Multimode filter: lowpass, bandpass or highpass with drive and FM
• Combination arpeggiator / 16-step sequencer with extra modulation source
• 2 built-in effects: stereo delay, chorus / flanger
• Resizable UI from 70% to 200%
• Skinnable UI
• Global preferences page
• MIDI learn page and editable list
• Over 300 factory presets
• NEW in v1.2.3: Support for Oddsound MTS-ESP

Requirements
• Apple – Mac OS X 10.9 or newer
• Windows – 7 or newer
• Linux

Host software / DAW
• 1GB RAM, more recommended
• 50MB free disk space
• 1000 × 600 or larger display
Modern CPU required:
• Windows/Linux: Intel Nehalem or newer, AMD Bulldozer or newer
• Mac: Intel Nehalem or newer, Apple M1
• Linux: glibc version 2.28 or newer

NKS-readyPodolski is Native Instruments NKS-ready and compatible with Maschine and Komplete Kontrol hardware.

https://u-he.com/products/podolski/podolski.html

U-he Zebralette v2.9.3 x64 x86 VST VST3 AU AAX WiN MAC LiNUX [FREE] 5 (1)

uhe-zebralette-screenshot-fullui-1150x619

Zebralette: easy spectral synth
Zebralette is our version of a Trojan horse. A free synthesizer and an introduction to Zebra2’s fantastic oscillators. Perhaps it will persuade you to try Zebra2 and upgrade. If one oscillator is this powerful, imagine what you can achieve with four… and all the other great features available in Zebra2.

Features

• A single Zebra2 oscillator with a 16-slot waveset. Read more below
• Oscillator waveform editing with geomorph, spectromorph, geoblend and spectroblend modes. Read more below
• 24 spectral effects including filter, sync, scatter, phase distortion and many more
• Polyphonic (up to 16 voices), monophonic and legato modes
• Stereo VCA with pan and volume modulation
• VCA oscillator stacking with adjustable stereo width: single, dual, quad and eleven modes
• ADSR envelope with fall/rise (sustain slope) and velocity controls
• Modulation options including: modwheel, velocity, pressure, breath, key follow, gate and more
• 2 LFOs: one global, one per voice
• A 32-stage MSEG (multi-stage envelope generator)
• 3 built-in effects: chorus/phaser, EQ, delay
• MIDI learn / unlearn of hardware controls (CC)
• Polyphonic aftertouch support
• 300 factory presets
• Scalable UI from 70% to 200%
• NEW in v2.9.3: Support for Oddsound MTS-ESP

What is a Zebralette?

-ette: an English suffix indicating a diminutive form
Zebralette is an introduction to Zebra2’s powerful oscillators. Zebra2 can seem overwhelming at first glance, so we stripped it down to a single oscillator plus a few other features and created Zebralette, the little Zebra. Once you master Zebralette you can move up to Zebra2 with confidence. And your presets can come with you, as Zebralette presets can be opened in Zebra2.

But more than a teaching tool, Zebralette is an incredible sounding synth in its own right. Surrounding Zebra’s spectral oscillator with a few core modulation options and effects make Zebralette highly capable. With unsion options (think supersaw, but Zebralette is not limited to saw waves, so we refer to it as superwave), 16 voice polyphony and two different envelopes, you have everything needed to create some marvellously complex sounds.

Diminutive? Yes. Powerful? Yes.

Zebra oscillator
One oscillator may not seem like enough for a synthesizer, but Zebra2 oscillators are rather powerful and clever.

It resembles many other oscillators you may have used. You can choose a waveset from the included library, or use the waveform editor to draw your own shapes. Here is where things start to get interesting: The Waveform Editor manages up to 16 different waves and lets you rearrange, duplicate and morph between individual waves. Use one of modulation sources and the WaveWarp control to scan through the 16 waves and create unusual, dynamic sounds.

There are four drawing modes: GeoMorph, SpectroMorph, GeoBlend, SpectroBlend, each offering a different approach to creating and manipulating waveforms.

Using the two Geo modes you draw the waveform shape using up to 32 points, while the Spectro modes let you create the harmonic spectrum over 128 columns. When using WaveWarp to scan through the waveset, Morph alters the waveform, whereas Blend blends (crossfades) between adjacent waves.

Requirements:
• Apple OS X 10.9 or newer
or
• Windows 7 or newer
or
• Linux

Host software / DAW
• 1GB RAM, more recommended
• 50MB free disk space
• 1000 × 600 or larger display
Modern CPU required:
• Windows/Linux: Intel Nehalem or newer, AMD Bulldozer or newer
• Mac: Intel Nehalem or newer, Apple M1
• Linux: glibc version 2.28 or newer

Formats
Zebralette is not a standalone product, it requires host software. Zebralette is compatible with nearly all DAWs.

macOS:
• AUv2, VST2, VST3, 64-bit only
• temporarily no AAX (read more)

Windows:
• VST2, VST3, AAX*
• 32-/64-bit
* AAX requires Pro Tools 10.3.7 or later

Zebralette 2.9.3 (revision 12092)

Native M1 ARM support

Improvements:
• Native support for Apple Silicon chips (M1)
• Improved GUI performance (Mac only)
• Support for Oddsound MTS-ESP
• Improved handling of junction links on Windows
• Preset list scroll direction preference

Fixed Bugs:
• Fixed some old Zebralette presets not loading in Zebra2
• Fixed multiple things in preset browser
• Fixed crash when loading script presets (e.g. Randomizer)
• Fixed rare crash on project reload
• Fixed audio clicks when switching presets

Known Issues:
• Context menus need plugin focus to work (Apple issue)

Special Notes:
• AAX support on Mac removed temporarily (will come back in next update)
• Updated minimum requirements, CPU needs to support SSE4.2 instruction set
• Linux: minimum required glibc version is 2.28 (otherwise plugins won’t show up)
• macOS 32-bit support discontinued

https://u-he.com/products/zebralette/

Cheap RTA by reFuse Software 0 (0)

CheapRTA_3

Cheap RTA is a 1/3 octave Real Time Analyzer.

  • Classic 30 band display.
  • 4dB per LED resolution.
  • Resizable to a wide range of dimensions.

Runs on mono or stereo tracks. Stereo signals are summed to mono for frequency analysis, but your audio signal is passed through unchanged.

We kept the CPU load lightweight for this one, so it won’t bog down your system.

There are no parameters to adjust, but the window does allow resizing over a wide range of dimensions and aspect ratios.

https://www.refusesoftware.com/