Live Pedalboard by lostin70s 0 (0)

Live Pedalboard is a guitar rig stompbox.

  • Distortions, overdrives, fuzz, delay, compressor, chorus, tremolo, reverb, …
  • Up to 3 simultaneous effects of the same type.
  • 6 slots.
  • 3 user banks with 10 presets.
  • The presets are global and saved on your hard drive.
To save a preset, first click on the “Save Preset” button, the red LED lights up and then choose the bank and the preset you want, be careful with this action erases the selected preset for all instances of the plugin.

 

Trans Gate by Gyl Synths 0 (0)

It is a stereo “trance gate”, started from that, what used in the Saturn.
Added many extras to it: step based LP-HP-BP filter with cutoff and resonance, step based and global smoothing, a stereo, step based delay with adjustable time, fixed feedback and mix to more rhythmic patterns and the usual extras, like resizable GUI, randomization,…
The lower radio buttons switch between the step bar windows.
I’ve made only 4 useless presets to test the working and the preset saving – seems good, so create your own patterns and try the possibilities!
The 32&64 bit effect plugins (Win VST) can be downloaded here:

TubeOhm Pure-Pone4free[win][VSTI][x86] 0 (0)

The Pure-Pten  Synthesizer is a virtual analog synthesizer (mono free version).

FM, SYNC  and RING modulation in connection with the super wave oscillator gives you that phat sound. 2 x modulations matrixes, a 12/24dB multimode filter and a delay/chorus unit takes sound design to the next level.

  • 3 oscillators
  • FM, RING, SYNC
  • Super wave oscillator
  • 12/24dB LP/HP/BP multimode filter
  • 2 x LFO‘s
  • VCA / VCF ADSR
  • Arpeggiator
  • Effects unit with delay, chorus
  • Soft distortion
  • Midi learn

https://www.tubeohm.com/page13.html

Pure-Pone4FREE

BIONIC PLUCKS AND MALLETS – LITE EDITION by RIOT AUDIO[Kontakt] 0 (0)

INTRODUCTION

Bionic is a “transient splicing engine”, i.e. it is designed to give detailed control over a range of parameters needed to mix and match a number of different initial transients to another set of tails/longer sounds.

SOUND DESIGN POSSIBILITIES

The result are

  1. Hybrid recreations of classic sounds with mostly organic attacks (taps, mallets, plucks, brush) and a mix of organic and synth/pure sine tails.
  2. Creative, inventive sounds that push the combinations of previously unrelated sounds into new territory

Some of the “bionic” sounds included in this initial version of the product (Lite):

  • Replicas of classic house organ sounds
  • Celesta, Music Box, Xylophone
  • A range of bass sounds including a “reconstructed” pizzicato upright bass

There are four layers, accessible on page 1: two transient layers, and two tail layers. Levels can be adjusted as balance between each of the tail/transient layers respectively, and globally between transients and tails. Each layer contains sample offset and tuning controls as well as a “humanize” function which introduces subtle to not-so-subtle random pitch variations (especially helpful for making non-tonal transients more realistic).

The effects page includes filters, EQ, saturation and delay + reverb controls.

FEATURES

  • 4 layers of sound: 2 transient layers and 2 tail layers
  • Extensive sound sculpting controls, including crossover fade (between transient and tail samples), crossover point, tail envelope, transient attack curve (shape)
  • Vibrato, Velocity Sensitivity (Volume, Low Pass and High Pass) and Humanize Controls for in-depth realism
  • 20 Presets: Tap Celesta, Tap Bell, Mr Android Pluck, Plastic Pizzicato Bass, Breathy Stab, Expansive Xylophone, Rhodesian Scholar, House Organ, Vibey House Organ, Steel Drum Baby, Music Box, Starlight Swoosh, A Gong or Two, Plucky Squelchy Bass, White Noise Organ Stab, Pillow Harp, Gamelan, Hammond Bass, Electric Bass, Heavy Tines.
  • Replika Analog Style delay
  • Based on Riot Audio’s proprietary BIONIC TRANSIENT SPLICING ENGINE
  • Total size of sampled content: 0.36 GB
  • Requires Native Instruments Kontakt 6.4.2 (Full Version)

https://riotaudio.com/product/bionic-plucks-and-mallets-lite/

Riot_Audio_Bionic_Plucks_and_Mallets_Lite2

AUXTURE – Unique exploratory sampler + sequencer by Audiobulb(Payware) 0 (0)

AUXTURE – Unique exploratory sampler + sequencer

Platform: Standalone Mac and PC + Ableton M4L.

For more information visit: http://www.audiobulb.com/AUXTURE.htm

AUXTURE is a unique exploratory sampler and sequencer (AUX-Seq) which enables the user to manipulate and record single samples or entire folders of samples through gesture, randomness and modulation. Unexpected results are achieved via the audio exploration of single samples or entire folders through gestures, randomness and modulation. The software comes bundled with a ‘Slices’ folder containing 115 free to use samples.

AUXTURE processes your loaded samples across a myriad of random parameters. The results open up a unique portrayal of your sound.

When AUXTURE receives a note, it applies an exploratory set of processes resulting in unique outputs based on unexpected outcomes or happy accidents applied to your sample set.

It chooses a random sample from its memory according to a freely settable probability. It then plays it back with a rate proportional to the pitch.

Some parameters related to sample playback are directly settable, such as loop mode, pitch shift and detunes, while others are based on chance, such as choosing another sample or reverse playback.

A random delay of a few milliseconds allows a rapid and unpredictable timbre variation, while frequency and ring modulations alter the sample more heavily. For a subsequent smoothing of the sound and to ensure complete processing there are digital distortion, delay, a weird reverb and two second order filters.

Features: Multi-effect software module featuring:

▪ ADSR Envelope
▪ Timbric Delay
▪ Frequency Modulation
▪ Ring Modulation
▪ Redux Distortion
▪ Stereo Delay
▪ Weird reverb
▪ 2 x Second Order Filters with cut-off, resonance and gain controls
▪ Bandpass, Notch and Shelf Filters.

The default playback mode is looping the sample during sustain phase, it’s possible disabling this behaviour. It’s also possible to set a sample change and reverse playback probabilities.

For more information, videos, manual and sound demos visit: http://www.audiobulb.com/AUXTURE.htm

Price: 20 £

Melda Productions MFreeFXBundle v14.16 x64 x86 VST AU AAX WiN MacOS [FREE] 0 (0)

MFreeFXBundle contains a set of audio effects

Our commercial plugins offer many more features, but these are still extraordinary when compared to most plugins on the market. You can extend the features of these free plugins at any time by purchasing a licence.

changes
14.16 changes Added enhanced aliasing improving the audio quality for most saturation algorithms available throughout the plugins. The downside is slightly higher CPU usage. It can be disabled from settings if needed. MXXXCore and MSuperLooper now also unlock MTurboReverb with only MTurboReverbLE licence and Equalizer with MFilter licence. Added native Apple Silicon CPU (currently M1) support. Added "Profile mixer" to MCabinet. Added groups to MMultiAnalyzer. Easy screen locks for title buttons have been moved to the left for consistency reasons. Preset search fields are now highlighted in red to highlight them and avoid confusion when user forgets that something is written in there. Added "High accuracy" switch to MCCGenerator. MultiParameters in banks mode can now create custom categorization for switcher menu by setting banks names to "category#text". Added Channel parameter to MIDI settings / Program change in presets. Holding Alt when clicking various copy buttons will allow exporting as XML button for editing as text. You can then edit the text and ctrl + pasting it back. Fix: Automating multiparameters when the plugin was sleeping made no effect. Fix: Closing text edit popup with escape key didn't work. Fix: Keys A, C and V were forwarded to the DAW even if the plugin edit was actually using them. Fix: MDrumReplacer's MIDI output didn't work in some DAWs. Fix: MTurboReverb delay order down was sorted up instead. Fix: Downloader could crash when installing certain 3rd party products. Fix: Downloader requested a correct MSoundFactory path even when installing MDrummer/MDrumReplacer data. Fix: MRhythmizer could ignore MIDI commands for volume sequences if the volume sequences were not defined. Fix: Installer didn't show proper products when clicking on the home icon in the product selection page. 14.15 changes Improved the default Neon style. Added MIDI out feature to MDrumReplacer. Added "Follow host name and color" feature to MMultiAnalyzer. Added Integrator module to MXXX. Added "Set output gain" feature to MAGC. Fix: MGranularMB was crashing in some circumstances. Fix: Keyboard forwarding disabled on Bitwig due to some problems in it. Fix: MCompressor was doing an inaccurate reduction for levels somewhere below -180dB. Fix: Custom GUIs were not available on case sensitive file systems in MXXX. 14.14 changes Big improvements in MDrumReplacer, officially released now. Added "Apply EQ" switch to MSpectralDynamics. Improved plugin selection page in the installer. Improved VST3 support. Added "Gain" and "Gain random" to each voice in MGranularMB. "Intelligent disable on silence" renamed to "Intelligent sleep on silence" to avoid confusion. Added features to the "Custom GUI designer" in MXXX. Improved keyboard to forwarding to DAW on Windows and added "Forward unused keyboard input to DAW" option in case you want to disable it. Added "Display waveforms" option to MSuperLooper, useful for additional CPU saving. Lots of changes to MTurboAmp alpha version. Fix: Any info/error message containing "_" made this character replaced by a whitespace. Fix: MRotary was crashing in MXXX when the Materials were turned on. Fix: Several plugins (such as compressors) didn't update the visual state when bypassed or in disabled mode. Fix: MGranularMB could cause initial peaks/glitches with specific settings and audio signals. 14.13 changes Big improvements for MDrumReplacer Windows plugins now forward unused keyboard commands to the DAW to make sure the DAW doesn't loose spacebar as play/stop for example, even if a plugin popup is displayed. Added Favourites tag, which you can use to filter the favourite devices to MXXX. Parametric equalizers now have band presets. Several minor fixes and improvements. Fix: MFreeformEqualizer could stop processing when switched to minimum phase mode in some cases. Fix: MTurboDelayMB didn't work properly. Fix: Some windows didn't save position and size. Fix: MTurboReverb was crashing in ambisonics and surround modes. 14.12 changes Most plugins now provide "Intelligent disable on silence" feature allowing them to disable themselves to save CPU whenever there is no signal and the plugin doesn't produce anything anymore. It can be disabled from settings. It works with all plugin interfaces and DAWs. Added "Random every time" option to MGranularMB and Granular module in MXXX. Added "XY-pad 4 banks" to banks mode of all multiparameters, allowing you to create XY pads, which would interpolate between 4 banks. Note that such multiparameter also occupies the next one, which is needed for the Y value. Added band Solo & Mute to all parametric equalizers. Available from band settings popup. Custom GUI designer now allows resizing keeping ratio when holding Alt in MXXX. Added "Replace" feature to MSuperLooper. Added per-track "Default bars" override to MSuperLooper. Minor GUI, stability and performance improvements. Plugins with latency now compensate synchronization position from DAW accordingly. For example, MRhythmizerMB is now synchronizing properly in linear-phase mode. Installer now logs installation of the MSVC redistributables and installes it only once. Fix: "Do not load from presets" option in MIDI controllers didn't work properly. Fix: Ambisonics wasn't available in ProTools. Fix: ReportLatency module didn't update latency when changed until audio engine was restarted in MXXX. Fix: MXXX6out could crash in some DAWs. Fix: Crossover module could cause crashes when changing crossover type in MXXX. Fix: Arp didn't store current matrix preset in MXXX. Fix: Changing an Enable title button with a multiparameter didn't enable/disable other title buttons. Fix: MNoiseGenerator was generating true noise in "True noise" mode only for one channel. Fix: Look-ahead in MSpectralDynamics didn't work properly. Fix: Multiparameter bank reordering didn't work with more than 100 banks. 14.11 changes Released MDrumReplacer beta, added to MXXX as well. Improved MTuner accuracy and visualisation, added "Auto switch to normal tuner" option. Added Analyzer to MDrumLeveler for easy setup of the prefiltering. Added MXXX6out version. Minor GUI and performance improvements. Fix: MRecorder was reporting an error when the target path started with "~". Fix: Custom GUI designer could create incorrectly resized images for lower resolutions when custom images were used in MXXX. Fix: Impulse response export wasn't working properly for plugins with latency. Fix: Having a "" symbols in multiparameter name would make multiparameter manager impossible to display. Fix: Some MB versions of certain plugins could share the default settings with the non-MB versions. Fix: Changing presets in VST2 didn't update all the parameters in the DAW. 14.10 changes Export IR has been removed from MFreeformEqualizer, since the global IR button in the toolbar does the same thing. Improved font engine for nicer and more readable GUIs. Minor GUI and performance enhancements. Random preset feature makes sure the next preset is different from the previous (if possible). Fix: MTurboReverbLE dynamics section couldn't be activated. Fix: Device browser wasn't selecting the loaded device in MXXX. Fix: Displaying a tab as popup didn't properly store it's position and size. Fix: Multiparameter units could sometimes go wrong with "By bank name interpolated" mode. Fix: Global "Set" button may have produced incorrect results. Fix: Using SuperLooper inside MXXX could cause a crash. Fix: MTurboReverb ER's Analyse IR feature crashed on mono files.

https://www.meldaproduction.com/MFreeFXBundle

maudioplugins_14_16_setup

maudioplugins_14_16_setupmac

Impact Soundworks Heritage Percussion KONTAKT [FREE] 0 (0)

Add texture and nuance to your tracks with a FREE collection of 13 heirloom hand percussion instruments: shakers, claves, rattles, djembe and more. Heritage Percussion also debuts a new, improved drum engine for easy use and more detailed editing.

Features:
• Beautiful new user interface
• Create your own custom drum mapping
• Adjust the tone and envelope for each drum
• Newly-expanded CONSOLE FX rack and mixer
• Now includes premium delay, reverb, and compression
• Create the perfect mix with no external plugins

Content:
• 13 hand percussion instruments
• Recorded in crisp 24-bit fidelity
• Djembe, rattles, claves, shakers
• Open, muted, and rim djembe strikes
• Superb detail: up to 5 dynamics and 10 RR
• Close and room mic positions

Requirements:
KONTAKT 6.5+ required
• 1.5GB disk space
• 400 MB RAM

https://impactsoundworks.com/product/heritage-percussion/

Heritage.Percussion.KONTAKT

Mastrcode Music free T-Force Delay plugin 0 (0)

T-Force Delay is a dual mode delay effect device. It can be used to add an echo effect to your sound. Its feedback signal can be modulated with filters and a degrader, to emulate the old vinage style analog tape echo effects. It can produce simple stereo delays, but also can be switched to ping pong mode for that typical left/right pingpong echo effect. it also has a flanger to create some crazy flanger effects on the feedback signal.

Available as 64 bit VST/VST3 and 32 bit VST.

Features:

  • Effect device for using as insert effect or send effect
  • Powe switch – can be switched off to turn the plugin into bypass mode
  • Sync switch for switching between free mode and host sync mode for the delay time
  • Switch for enabling ping pong mode
  • Delay time control – controls the time of the delay
  • Feedback control – controls the feedback signal length
  • Mix control for the dry signal
  • Mix control for the wet signal

Feedback modulations:

  • Filter – used to create that typical analog tape echo style lowpass/high pass filter fitlering effect in the feedback signal
  • Degrader – used to create a degrade/downsampling the effect in the feedback signal

Flanger:

  • Adds a flanger effect to the wet signal
  • Rate control – used to control the tempo rate of the modulation
  • Depth control – used to control the modulation depth
  • Feedback control – used to control the amount how strong the flanged signal will fed back into the flanger which results in a more “metallic” sound.
  • Mix control – used to control how strong the flanger effect will be added to the wet signal.

Other features:

  • All controls are fully automatable
  • Available as 64 bit VST2/VST3 and 32 bit VST2

How to install: instructions how to install this plugin are included in the zip file.

Info: the VST2 version of the plugin also uses the VST3 preset system (.vst3preset), to make the presets cross-compatible. For more infos please read the “Read me first!” text file included in the zip file.

Please note: supports Windows 7 and higher only, because the plugin uses a new graphics API – all graphics now will be rendered with your graphic card’s GPU instead of the CPU. Windows XP doesn’t support the new graphics API. No Mac support, because some 3rd party code modules are used inside the plugin which are just available for Windows. If the developers of these code modules make them available for Mac, i will also add a Mac AU version in future.

You might need to intall Microsoft Visual C++ 2015/2017 Redistributable

https://mastrcode-music.de/en/vst-plugins/t-force-delay/

T-Force Delay Version 1.0

Tonetta Blue by Flandersh Tech 0 (0)

Tonetta Blue  is a semi-modular 8-voices polyphonic synthesizer.

The frontside spots two type of oscillators, each with 19 waveforms to choose from, analog style filters, curve and LFO modulation, waveshaper, and a convolution reverb.

Turning the back-button reveal a modular environment with internal and additional signal sources and destinations, signal splitter and mixer, step sequencer, S&H, and additional, modular effects.

  • 2 primary sound sources with 19 custom waveforms to choose from.
  • 2 analog style filters.
  • Curve and LFO modulation.
  • Shapeable waveshaper.
  • Convolution reverb, waveshaper, modular EQ, and modular delay.

https://flandersh.weebly.com/tonetta-blue.html

Setup_Tonetta-Blue

Saxophia by Fanan Team 0 (0)

Saxophia is a virtual analog Saxophone module that uses 4 independent 32bit top quality waveform with incredible dynamic range to generate 4 ethnic Saxophones emulation, each with its own size and color; alto,baritone, soprano and tenor. Saxophia has full synthesis section, 2 different midi velocity options, a user friendly global hipass-lopass filter, a full section of built in effects (saturation, chorus, phaser,tremolo, reverb and delay), built-in draw-bars system and full midi learn system. Saxophia is free! enjoy!

https://www.fananteampro.com/saxophia

Saxophia VSTi