Tonetta Blue by Flandersh Tech 0 (0)

Tonetta Blue  is a semi-modular 8-voices polyphonic synthesizer.

The frontside spots two type of oscillators, each with 19 waveforms to choose from, analog style filters, curve and LFO modulation, waveshaper, and a convolution reverb.

Turning the back-button reveal a modular environment with internal and additional signal sources and destinations, signal splitter and mixer, step sequencer, S&H, and additional, modular effects.

  • 2 primary sound sources with 19 custom waveforms to choose from.
  • 2 analog style filters.
  • Curve and LFO modulation.
  • Shapeable waveshaper.
  • Convolution reverb, waveshaper, modular EQ, and modular delay.

https://flandersh.weebly.com/tonetta-blue.html

Setup_Tonetta-Blue

0
0

KUJASHI Soundbank for the SYSTEM ONE D_mv by Kevin Brown 5 (1)

Soundbank (128 Patches) +Drumsound-Bank (31 Patches) für den SystemONE-D_mv  (Buchla 200 series-Emulation) von Kevin Brown

Wer weiß, wie ein Buchla eigentlich klingt? Einfach mal in die Werke von Suzanne Ciani oder Kaitlyn-Aurelia Smith oder auch Alessandro Cortini (Orchesterwerke) reinhören.

Der SystemOneD ist nach Entwicklerangaben (K. Brown) eine Emulation von früheren Buchla-200 series Modulen und ich habe versucht, in diese Modulserie einzutauchen und Klänge “herauszuschälen”.

Herausgekommen ist ein Sammelsurium von “Strange Noises”, Drone-Klängen, Bässen, majestätischen FM-Gebilden, Modularsweeps, Modular-Vocal/FOrmant-Stimmen, Glocken und Keyboardsounds, Buchla typischen Percussionsounds, verrückten Effektklängen und Sequencersounds (der SystemOneD-mv) hat allerdings keinen integrierten Sequencer (daher extern in den Klangbeispielen) sowie Klängen, wie sie wohl nur ein Modularsystem hervorbringen kann.

Außerdem habe ich noch eine kleine Drum/Percussionsoundbank mit 30 Klängen dazuprogrammiert.

—————————————————————-

A soundbank with 128 patches and a Drumsoundbank with 31 patches for the SYSTEM ONE D_mv by Kevin Brown

SystemOne D_mv is a emulation of the earlier BucHLA 200 Series:

Do U know how a Buchla sounds? Please, listen to the works of Suzanne Cziani or Kaithleen-Aurelia Smith for example.

This synth is a emulation with some modules of the 200e Series of Buchla and I´ve tried to get into the secrets.

I´ve made a whole bunch of sounds – from strange noises to strong Drones, Basses and majestic patches of FM-synthesis, Modularsweeps, Modular Vox, Bells and analog Keys, Buchla typical Percussion, Crazy SFX and Sequencerfood (this synth has no internal Sequencer) and sounds that only a modular synth can generate.
There´s a little bank with Drum & Percussionsounds for any needs, too.

Einfach mal das Sounddemo durchhören, welches zeigt, was man mit den Klängen der Bank (inkl. Drumbank) so anstellen kann. Eingespielt nur mit Klängen aus der Bank (inkl. Drums/Perc) und ohne externe Effekte.

Pleaste, listen to the sounddemo – this shows the usage of the soundbank. Played only with sounds from this banks and without the use of external effects.

Demo:

For download the banks you have to register and login in the forum, it is free!

0
0

SawPluck by RDGAudio 0 (0)

SAWPLUCK

SawPluck is our first Analogue Emulated Trance Pluck Synthesizer for quick Trance Chords, Riffs and Melody creation. We have carefully crafted all the details of analogue circuitry and electronic components through advanced DSP and Mathematics. Coded through C++ Framework.

Why did we make Analogue Virtual Emulation?

Although it’s a Single Oscillator Synthesizer still it has a very warm sound what is usually missing in regular subtractive synthesizer. When you will play and tweak it’s settings you will get pure rich analog Pluck sound inside your DAW.

Is It free for personal and commercial use?

Yes, It is currently giving away for free.

Features

  • SawPluck is free .
  • Single SAW OSC yet rich and warm.
  • 15 different Filter types (Low Pass, High Pass, Notch, Hybrid, Analog etc..).
  • Amp Envelope and Filter Envelope (ADSR).
  • Filter Cutoff, Reso and Filter Mod.
  • Built in Delay and Reverb Effects.
  • .rdg/.RDG user presets.
  • Comes with Factory presets.
  • User can create and save their own Presets as .rdg file format.
  • 32 voice Polyphony.

System Requirements:

  • Graphics Card 1GB (2 GB recommended).
  • RAM 1 GB (2 GB recommended).
  • Intel CPU.
  • ASIO driver and audio interface.
  • Windows VST3 64-bit.
  • Mac VST3.
  • Windows 8,10 (64-bit).
  • Mac Mojave or Up.

https://rdgaudio.com/sawpluck/

RDGAudio SawPluck with Library and Factory Presets

RDGAudio SawPluck Mac VST3 with Samples

0
0

Performer Free by Crumar – linux 0 (0)

Performer Free is a freeware edition of the Crumar Performer plugin released only for Linux users. It is a stripped-down version with every extra feature removed, leaving just the Performer as it is in real life. It’s available in VST2, VST3 and StandAlone format as a precompiled binary for amd64 (Intel architecture) and armhf (Raspberry Pi4 and compatible boards). The UI dowsizes automatically if the screen resolution is lower than the normal plugin’s UI size, in order to fit smaller displays that can be used with the Raspberry Pi. It’s been tested and proved to work flawlessly under Ubuntu 20.04, Ubuntu 20.10, Raspberry Pi OS running on a Pi 4 with 4 GB RAM, and Raspberry Pi 3 B+.

https://www.crumar.it/?a=showproduct&cat=software&pid=CSP0

CrumarPerformerFree

 

0
0

Analog Obsession KONSOL v3.0 VST VST3 AU WiN MAC [FREE] 0 (0)

KONSOL

3 Model mixing console plugin with Transformer, Bus Option and 2 Band Shelf EQ.
Track Mode : Transformer (On/Off) -> Line In Amp -> EQ – > Line Out Amp

Bus Mode : Transformer (On/Off) -> Summing Amp -> EQ -> Line Out Amp -> Transformer (On/Off)

Gray : 016 (Tube based)
Blue : 73 UK Console (Transistor based)
Black : Logic 4 Console (Op-Amp based)
EQ : 73 UK based

Features

INPUT: Preamp gain 0 to 24dB

OUTPUT: Output control -24 to 24dB

LOW: British style low shelf @100Hz – +/-6dB

HIGH: British style high shelf @10kHz – +/-6dB

XFMR: Transformer on/off

MODE: Bus or track option (Default setting is Track)

MODEL: Tube, Transistor, Opamp

KONSOL: Bypass button (It will be white when you click it and plugin will be bypassed)

ANALOG OBSESSION: This label is clickable. It will turn to red and engage Oversampling (4x)

Version 3.0 – 16.2.2021

– Added Oversampling feature

– Catalina / Big Sur (M1) support

– New GUI

Available Formats

VST/VST3/AU | Mac 10.9 – 11.X

VST/VST3 | Windows 7 – 8 – 10

https://www.patreon.com/posts/34420510

KONSOL.3.0

0
0

Analog Obsession Kolin v4.0 VST VST3 AU WiN MAC [FREE] 0 (0)

Analog Obsession Kolin v4.0 VST VST3 AU WiN MAC [FREE]

Vintage limiting amplifier with additional features like adjustable attack and release.

Features
– 1ms to 50ms Attack Time
– 0.1sec to 3sec Release Time
– MIX option to blend DRY and WET signal
– 20Hz to 500Hz Sidechain HPF
– External Sidechain (EXT-SC)
– 40dB input range
– +/- 20dB output

Version 4.0
– Re-designed GUI
– Improved harmonic response
– Improved Attack & Release responses
– Improved stability
– Lowered CPU usage

Notes;
– Ableton Live (Mac) users should use VST version.

https://www.patreon.com/posts/kolin-34292009

or

Kolin4

0
0

Blue Cat’s Freeware Plug-ins Pack II 0 (0)

This bundle contains a wide range of premium modulation effects,a guitar amp simulator, a single and dual-channel equalizer, a unique midi-controllable gain suite, as well as a professional spectrum analyzer.

All plug-ins are available for Mac and PC, in VST, VST3, AAX and Audio Unit plug-in formats, for both 32 and 64-bit architectures.

For more information about the 7 products included in this bundle, see the list below.


The Chorus effect was originally designed to simulate several voices, just as if several persons were playing together the same notes, but with a variable delay between them. This is one of the typical effects that you can get with Blue Cat’s Chorus.

But this plug-in also enables you to drastically change the original sound and create deep pitch modulation or crazy ‘bubbling’ effects.

With the additional “Spread” control on the stereo version, the famous stereo widening and head spinning chorus effects are a few click away.

Features

Main Features

  • Single voice vintage chorus effect.
  • Stereo spread control.
  • Sine or triangle LFO shapes.
  • In or out of phase mix control.

Blue Cat Audio Standards:

  • Available in most plug-in formats for Mac and Windows.
  • Full MIDI control and automation support, MIDI Learn.
  • No CPU load on idle: processing shuts down when fed with silence (optimal CPU usage).
  • Customizable user interface with transparency & zoom.
  • Smooth Bypass: noiseless plug-in activation / deactivation.
  • Undo/Redo.
  • Full featured integrated presets manager.
  • Copy/paste the state of the plug-in between instances.
  • Any sample rate supported.

Blue Cat's Flanger - Classic Flanging Effect Audio Plug-in (VST, AU, RTAS, AAX, VST3) (Freeware)

Very famous during the 70’s and 80’s, the Flanger effect can be used on almost any audio track: on drums, voices synths or guitars, from a subtle effect to a deep alien-like voice effect, enjoy it!

Despite its simple user interface, Blue Cat’s Flanger is very versatile: harsh and metallic or smooth and soft filtering effects, it can do them all, for free!

The stereo version also lets you smoothly transform it into a stereo flanging effect with a single knob. Push the “Spread” slider and hear the difference: the effect is turning around your head, and the sound takes another dimension, spread into the stereo field.

Features

Main Features

  • Vintage flanger effect.
  • Stereo spread control.
  • Sine or triangle LFO shapes.
  • In or out of phase feedforward and feedback paths.

Blue Cat's Free Amp - The Free Guitar Amp Sim Plug-In (VST, AU, AAX, VST3) (Freeware)

Blue Cat’s Free Amp is a completely free guitar amp simulation plug-in offering three amp models created with the acclaimed Blue Cat’s Destructor amp simulation modeler.

Inspired by legendary guitar amplifiers from the real world, the included “classic clean”, “classic drive” and “modern drive” amp models cover a wide range of guitar amp tones, from clean vintage sounds from the early days of electric guitar to modern high gain metal tones.

Operating the plug-in is extremely simple: load it in your favorite host application, choose a preset or an amp model, and play! Like with a real guitar amp, you can tweak the frequency response with the included EQ and adjust the amount of drive – but watch out, it goes to 11!

With version 1.1, you can also load your own impulse responses (IR): add your favorite cabinet, microphones & room setup and feel at home!

Last but not least, this plug-in is entirely free: no registration required, no dongle, no newsletter… It’s just 100% free!

If you are looking for a more powerful guitar and bass amp simulation modeler, check out Blue Cat’s Destructor. For a complete amp simulation solution with built-in effects, check out Blue Cat’s Axiom.

Main Features

  • Free guitar amp simulation plug-in.
  • 3 amp models inspired by legendary amplifiers: “classic clean”, “classic drive” and “modern drive”.
  • Simulations based on the Destructor dynamic distortion and amp modeling engine.
  • Load you own cabinet or reverb impulse responses to add color to the amp simulation.
  • No latency.

Blue Cat's FreqAnalyst - Real Time Spectrum Analysis Plug-in (VST, Audio Unit, VST3, AAX) (Freeware)

This plug-in has been designed to provide extreme smoothness and high resolution for both time and frequency: unlike most spectrum analyzers, Blue Cat’s FreqAnalyst is able to display continuous variations even with a very high frequency resolution, thanks to its unique smooth interpolation algorithms.

Most aspects of the audio to frequency display conversion can be managed, which lets you total control over the monitoring. A special thresholding system has been developed to help you see the important parts of the spectrum easily. In case you need extra precision in a particular frequency range, you can zoom the display and check the part of the graph you are interested in.

This plug-in supports Blue Cat’s skinning language, so that you can customize the user interface to your personal needs.

For more advanced capabilities, check Blue Cat’s FreqAnalyst Pro plug-in, an extended version that offers many more features, such as saving/restoring curves, precise measurement tools, 3D spectrogram view, MIDI output. For multiple tracks analysis, you can use Blue Cat’s FreqAnalyst Multi plug-in.

Features

Main Features:

  • Mono and stereo real time spectrum analyzer.
  • Total control over the audio to frequencies tranformation.
  • Smart interpolation algorithm for extreme display smoothness.
  • Zoomable display with multiple sizes.
  • Custom absolute and relative thresholds.

Blue Cat's Gain Suite - Simple Mono, Stereo and Mid-Side MIDI Controllable Gain Plug-ins (VST, AU, VST3, AAX) (Freeware)

This plug-in suite is a series of gain utilities which let you control the volume of one or several audio tracks simultaneously, in real time.

The interest of these plug-ins resides in their particular features:

First, they include advanced automation MIDI control capabilities (all response curves can be fully customized). Used together with one of our analysis tools or a MIDI controller, these plug-ins let you remotely control and automate the gain of each channel of the audio signal, wherever they reside in the signal path.

Another interesting and exclusive feature is the ability to link several instances of the same plug-in: thanks to our unique data sharing technology, you can control the gain of several tracks at the same time with a single slider.

The package provides a single channel (mono or stereo) as well as a dual channel version with mid/side capabilities for independent control of the left and right or mid and side channels. It can be very useful for stereo widening/narrowing your stereo tracks.

Note: Additional information about stereo widening with mid/side processing can be found in our M/S processing paper.

Features

Main Features

  • Single or dual channels gain plug-ins.
  • Stereo or mid-side processing.
  • Multiple instances linking capability: link several instances of the same plugin and control several plugins from a single user interface.
  • Relative, absolute or reverse link.

Blue Cat's Phaser - Analog Modeled Phasing Effect Plug-in (VST, AU, VST3, AAX) (Freeware)

Modeled after vintage analog phaser circuits, Blue Cat’s Phaser reproduces this old vintage phasing effect that you can find on so many recordings, but with the precision of modern digital processing techniques.

You can choose to apply up to 32 phasing stages, pushing the model to its limits, or create a subtle phasing effect with wet and feedback parameters set to a few percents.

You can also control the phase of the signal in the wet and feedback paths, which extends the possibilities of the original model.

On the stereo version, the additional “spread” control lets you obtain deep stereo widening phasing effects as well.

Features

Main Features

  • Multi-stage analog-style phaser effect.
  • Up to 32 phasing stages.
  • Stereo spread control.
  • Sine or triangle LFO shapes.
  • In or out of phase feedforward and feedback paths.

Blue Cat's Triple EQ - Semi-Parametric 3 Bands Equalizer Audio Plug-in (VST, AU, AAX, VST3) (Freeware)

This free EQ includes a low shelf filter, a high shelf filter and a boost/cut peak filter. Its wide range of gain (+/-40 dB per band) and bandwidth (.01 to 5 Octave) makes it very versatile to create any filter shape. The three filters are linked together so that when you change the center frequency or the bandwidth, the parameters of the three filters are modified accordingly: you can control the entire equalizer characteristics with a single mouse click.

The graph shows the computed frequency response of the plug-in, so that you can exactly know how your signal is processed. The controls are directly available on top of the filter graph, making the design of the filter shape even easier.

The plug-in also offers a dual channels version, with independent left/right or mid/side equalization capabilities. Both channels can be linked together in many ways, letting you transform this plugin into a frequency-dependent panner and much more.

The plug-in can be controlled in real time with MIDI or automation: it is capable of absolutely zipper-free clean and continuous time-varying equalization with no latency. it is the ideal companion of our audio analysis tools for signal-dependent side chain filtering.

Want more bands? Check out Blue Cat’s Parametr’EQ series.

Features

Main Features

  • True WYSIWYG 3 bands semi-parametric equalizer / shapeable filter.
  • Dual Mode: independent left and right or mid and side channels control.
  • Multiple channels linking modes.
  • +-40 dB range for each band.
  • Automatic gain compensation.
  • No latency.
  • Real time display of the frequency response with precise measurement and zooming capabilities.
  • On-graph filter shape control.

https://www.bluecataudio.com/Products/Bundle_FreewarePack/

 

 

 

 

 

0
0

Amped Stevie T Free 0 (0)

Amped Stevie T Free

 

Amped Stevie T Free is a guitar custom amp simulation.
It comes with one free amp called “Djent God”. The cabinet section includes four amazing options: ML Mega Djent, ML Mega OS, ML Mars PR-M75 and ML Bgnr Uber.


At launch Amped Stevie T has a Noise Gate, Drive, Delay and Reverb. Amped plugins have a shared pedalboard which means that the amount of pedals will continue to grow.

https://ml-sound-lab.com/products/amped-stevie-t-free

or

ML-Sound-Lab-Amped-Stevie-T-Win64Bit

ML-Sound-Lab-Amped-Stevie-T-Mac

ML-Sound-Lab-Amped-Stevie-T-Mac (1)

 

0
0

Tiny F by EXE Consulting 0 (0)

Tiny F (V0010) is a stripped-down version of Classic F. Tiny F uses about 10% of the CPU of Classic F, and it has ZERO software latency so has as fast a response as your hardware will allow. To achieve these goals, the tonestack is an approximation of the one in Classic F, the cabs are a set of filters rather than IRs, and the amp is single-channel, from either Left or Right input.

This amp does have the same improved distortion modelling as the most recent Classic Thirty, with a number of user-adjustable parameters for each tube stage. It has a two-stage preamp but can produce quite a bit of distortion if desired.

Tiny F includes both guitar and bass guitar amp sim capability. (For bass, be sure to reset the Low Cab Freq to something like 35 Hz!).

The GUI is resizable: Tiny, Small, Medium, Normal, Large, and Giant.

No stomps or rack effects are included at this time.

No Webside

tinyfonev0010_vst3_x64

0
0

BPB BPB Saturator free tube and tape saturation plugin 0 (0)

BPB Saturator is a freeware saturation effect that is lightweight and easy to operate. It utilizes waveshaping to simulate tube and tape saturation. The plugin can work as a subtle saturation tool or a tube-based distortion effect.

The tube and tape saturation modules can be used separately. It is also possible to apply both types of saturation at the same time for a cumulative effect.

Keep the tube and tape models below 15 for a subtle saturation effect. Use higher values for audible distortion and a subtle volume boost.

The plugin also features a pair of transparent filters (high-pass and low pass) for removing any unwanted frequencies. The filters are also useful for simulating the frequency range of analog gear.

BPB Saturator is available in VST, VST3, AU, and AAX plugin formats for digital audio workstations on PC and Mac. Both 32-bit and 64-bit plugin hosts are supported.

BPB Saturator

0
0